Changsha Daoyuan Wisdom Fluid Technology Co., Ltd.

Blog

Company News

Industry News

Media reports

Video Center

How to choose a chemical process pump?

As a key piece of equipment in chemical engineering processes, chemical process pumps are receiving increasing attention. Due to the complex characteristics of chemical media and the continuously rising demands from users, how should we, as manufacturers, make our selections? What should we focus on? These questions are particularly important. Let's take a look at how to choose chemical process pumps. Below is a brief review of the selection of commonly used chemical pumps, hoping to assist colleagues in this field in their work.

2022

Precautions for the use of chemical process pumps and disassembly and assembly

Chemical process pumps are widely used in industries, urban water supply and drainage, as well as irrigation and drainage in farmland and orchards, for transporting clean water or other liquids with physical and chemical properties similar to clean water. Let's take a look at the precautions for using chemical process pumps, as well as disassembly and assembly.

2022

Selection of long shaft pumps

The long shaft pump is a type of centrifugal pump. From the perspective of centrifugal pumps, the performance of liquid pumps has been improved, making it far superior to liquid pumps and operating more stably. Based on market demand, the company has developed the VT series long shaft deep well pump, which is widely used in industrial enterprises such as water supply companies, sewage treatment plants, power plants, steel mills, and mines, as well as in municipal water supply and drainage, flood control, and urban waterlogging projects.

2022

Introduction to Long Shaft Pumps

Long-axis pumps are suitable for transporting strip-shaped particles, high viscosity, strong acids, alkalis, salts, strong oxidants, and other corrosive media. The newly developed underwater pumps are suitable for enterprises to transport various lightweight media that are flammable and explosive. The casing, outlet pipe, and flow components of traditional underwater pumps are all made of corrosion-resistant materials. The motor part is located at the liquid surface, while the pump part is located below the liquid surface. The pump body, motor, and flow components of the new underwater pump are all made of special materials. The motor part is coaxially connected to the pump part and is located below the liquid surface.

2022

The use and installation of long shaft pumps

The long-axis pump determines maintenance projects based on the data from the operation technology development status monitoring system, conducts preventive inspections according to cycle management, and analyzes, repairs, or replaces defective components. When disassembling and replacing major components, it should comply with the main maintenance quality standards.

2022

Introducing the vertical long shaft pump

The length of the long-axis pump is reasonable, and the stiffness is sufficient. The design of the pump's water delivery pipe can incorporate a flange connection, with a guide bearing body between two adjacent sections of the water delivery pipe system.

2022

Long shaft pump manufacturer: Introducing information about long shaft pumps.

Long shaft pumps are mainly used for transporting clean water, wastewater containing certain solid particles (such as iron filings, sand, coal powder, etc.), corrosive industrial wastewater, and seawater; the temperature of the transported liquid does not exceed 80°C. They are widely used in primary water treatment plants, sewage treatment plants, the metallurgy and steel industry (especially in industries that transport oxidized iron scale in rotary water pools), power plants, mines, municipal projects, and agricultural irrigation projects. Long shaft pumps are primarily used in power plants and chemical plants, and are sometimes used in deep wells. They are also used in municipal, papermaking, drainage, and other enterprises.

2022

Installation precautions for middle-opening pumps

The middle opening pump is a common term we use. The middle opening pump (middle opening circulation) is also known as a single-stage double-suction centrifugal pump. Its main feature is the large flow of the medium being transported. Now, let's take a look at the installation and usage precautions for the middle opening pump!

2022

< 1...3 4 5...8 >

Hotline:

+86-0731-84019466

Telephone: +86-133-0749-1892 (WeChat with the same number)

E-mail：csdyzhlt@163.com

Company address: No. 399, Shetang Road, Qiantang Sub-district, Changsha Economic and Technological Development Zone, Building 3-A, Liao Technology Co., Ltd.

WeChat

Tiktok

Changsha Daoyuan Intelligent Fluid Technology Co., Ltd

This site supports IPv4、IPv6.

Business License

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.